Godspeed Camber Kit Dodge Durango (2011-2025) Rear Upper Control Arms – Pair

In Northern California? Get this professionally set up & installed!

Fitment Information

• Dodge Durango WK2, all trims, without air suspension (2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025)

Fitment Note: Fits all WK2 Durango trims across the full 2011-2025 production run with one exception. Does not fit any Durango equipped with factory air suspension (Quadra-Lift), which uses a different rear suspension geometry and is not compatible. To confirm whether your Durango has air suspension, look for a ride height selector button on the center console or check your build sheet for the Quadra-Lift option. 

Specs & Features

• Sold as a pair
• Direct fit, bolt on camber kits
• Improves handling by allowing adjustment of camber
• Rear upper control arms only. Camber is adjustable plus or minus 3 degrees from center, which is sufficient to correct alignment after most street and track-level lowering setups.
• Spherical bearings replace the factory rubber bushings for more direct feedback and elimination of deflection under load.
• Sold as a pair covering both rear corners.
• No installation instructions are included.
• Professional installation is required.
• A full wheel alignment is required after installation.
• Godspeed designates this product for off-road and competition use.
• Backed by a 1-year warranty through us as an authorized Godspeed dealer. Warranty requires installation by an ASE-certified mechanic. 

Pairs well with:

• Godspeed MAXX Coilovers Dodge Durango (2011-2024) 40 Way Adjustable with Front Lower Fork Mount Coilovers from the same manufacturer that pair directly with these camber arms. Lowering the Durango shifts the rear geometry outside the OEM adjustment range, making these camber arms a necessary companion for any Durango coilover installation.
• Eibach Pro Kit Lowering Springs Dodge Durango R/T (2015-2023) For buyers who prefer a spring-based lowering approach, these Eibach springs pair naturally with these camber arms since any drop will shift rear camber outside factory spec on the WK2 platform.

OEM Part Numbers

• Driver (Left) Rear Upper Lateral Arm: Mopar 68031455AD
• Passenger (Right) Rear Upper Lateral Arm: Mopar 68031456AD

These OEM part numbers apply across the WK2 Durango production run from 2011 through 2025. Buyers can verify using the Mopar parts catalog at mopar.com with their VIN. Quadra-Lift air suspension equipped models use different rear suspension components and are not compatible with this kit.

Frequently Asked Questions

• Will these fit my Jeep Grand Cherokee?
  No. Even though the WK2 Grand Cherokee shares the same platform as the WK2 Durango, Godspeed makes a separate variant for the Grand Cherokee (AK-216-E). The AK-216-F on this listing is for the Durango only. If you have a Grand Cherokee, reach out to us and we can point you to the correct kit.
• My Durango has Quadra-Lift air suspension. Will these still work?
  No. Godspeed specifically excludes air suspension equipped vehicles. The Quadra-Lift system uses a different rear suspension geometry and these arms will not be compatible. Check your build sheet or look for the ride height selector switch on the center console to confirm whether your Durango has Quadra-Lift.
• Why do I need camber arms on my Durango?
  When you lower the Durango with coilovers or lowering springs, the rear suspension geometry shifts and pulls the top of the wheel inward, creating excessive negative camber. If left uncorrected this causes rapid inner tire wear and reduces traction. These arms let you dial the camber back into spec after the drop.
• Do I need an alignment after installing these?
  Yes. A full four-wheel alignment is required after installation. The camber arms adjust the geometry but you need an alignment machine to confirm and fine-tune the final settings. Always budget for an alignment as part of the installation cost.

Product Description

Godspeed camber kits are made from high quality materials and craftsmanship to ensure a perfect fit and years of trouble free use.  Godspeed camber kits give you the adjustment range needed to adjust your camber for your specific needs – daily driving, drag racing, autocross or track.

Designed to be reliable for every day use yet strong enough for high performance race use.